micro-injection moulding; micro features; micro channels

B. Sha, S.S. Dimov, D.T. Pham and C. A. Griffiths
Manufacturing Engineering Centre, Cardiff University, Cardiff CF24 3AA, UK

Abstract

Micro-injection moulding is one of the key technologies for micro-manufacture because of its mass-production capability and relatively low component cost. The replication of micro-features is an important issue in broadening the use of this technology. The aspect ratios achievable in replicating such features are one of the most important process characteristics and constitute a major manufacturing constraint in applying injection moulding in a range of micro-engineering applications. This research studies the effects of five process factors and one size factor on the achievable aspect ratios, and the role they play in producing micro components in different polymer materials. In particular, the following factors are considered: barrel temperature, mould temperature, injection speed, holding pressure, the existence of air evacuation, and the size of micro features. The study revealed that the barrel temperature and the injection speed are the key factors affecting the aspect ratios of micro features replicated in PP and ABS. In the case of POM, in addition to these two factors, the mould temperature is also an important factor for improving the replication capabilities of the micro-injection moulding process. For all three materials, an increase of feature sizes improves the melt flow. However, the melt fill of micro features does not increase linearly with the increase of their sizes.