Multi Material Micro Manufacture Network of Excellence - Markets

Life Cycle Assessment of Micro Manufacturing Process Chains - Application to the Microfactory Concept

Mon, 12 Nov 2007 16:23:32 +0000

A. De Grave, S.I. Olsen, H.N. Hansen
a Department of Manufacturing Engineering and Management, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark

Abstract

Historically LCA has mainly been applied to products; however, it can be very useful in assisting the whole product development by identifying more sustainable options in process selection, design and optimisation. It has been shown that it is relevant to apply LCA to micro components and more specifically to the research area of micro manufacturing where both processes and products are stated to be environmentally friendlier because of their small size. It is assumed that environmental impacts can be reduced by reducing the size of the factory using the concept of microfactories. In this paper, first the typology of data used for performing an LCA is investigated in the context of micro technology, then an example of a micro injection moulding insert is given. The concept of microfactories is then addressed with and environmental impact paradigm.

Automated Patch Clamping Systems Design using Novel Materials

Mon, 12 Nov 2007 16:23:32 +0000

S. Wilson(a)(b), A. Welle(c), E.Gottwald(c), A. Molleman(d), P.B.Kirby(b), W.Pfleging(e), J.J.Ramsden(b), M. Heckele(a)
a: Institute for Microstructure Technology, Forschungszentrum Karlsruhe, 76344 Eggenstein-Leo., Germany
b: School of Applied Sciences., Cranfield University, Cranfield, Beds. MK43 0AL, UK
c: Institute for Biological Interfaces, Forschungszentrum Karlsruhe, 76344 Eggenstein-Leo., Germany
d: School of Life Sciences, University of Hertfordshire, Hatfield, Herts.AL10 9AB, UK
e: Institute for Materials Research 1, Forschungszentrum Karlsruhe, 76344 Eggenstein-Leo., Germany
A. Herrero(a), J. Esmoris(a), S. Azcarate(a), S. Geissdoerfer(b), U. Engel(b)
a: Department of Micro & Nano Technologies, Tekniker, Avda. Otaola 20, 20600 Eibar, Spain
b: Universität Erlangen-Nürnberg, Egerlandstrasse 11, 91058 Erlangen, Germany

Abstract

The mass production of micro and meso scale products made of polymers or metals is intimately related to the production of high quality microtooling in stable materials capable to provide an accurate and repetitive performance throughout the whole demanded production. As it is widely known, the WEDM process provides high accuracy but is conceptually limited to the production of ruled features. The SEDM process can be a complement to this aspect but the electrodes must be manufactured by other technologies like WEDM, micromilling, turning, etc. Given the importance of several parameters like dimensional accuracy, tooling material for the different replication processes or tooling production technology, the present paper introduces some tests performed by the 4M Metals Workgroup. The analysis of some components manufactured by members of the group is presented discussing the influence of the EDM process on the machined tooling components and the consequent influence on the replication process.

Patch clamping is a highly sensitive technique used to measure the electrical activity of a cell. It is presently a low throughput cumbersome method which requires highly trained and skilled operators to obtain results of value. Patch Clamping is used in applications which include drug screening where there is demand for high throughput systems (HTS). While there are a few commercially available HTS patch clamping systems on the market using traditional patch clamping materials, there are no systems on the market using novel materials, or for dealing with cell networks – a physiologically important consideration for the developing fields of tissue engineering and understanding cell to cell interactions. This paper presents a summary of traditional patch clamping, mentions some commercially available high throughput patch clamping systems based on traditional materials then, using 4M technologies, introduces some novel materials and potential design approaches and processes for producing a polymer based automated patch clamping system.

Bayerisches Laserzentrum

Wed, 18 May 2005 09:08:57 +0000

Facilities/Hardware:

Various laser systems for ablation, soldering, welding, marking, adjustment, sintering, stereolithography, LOM.

RAS contact:
Stephan Roth

KU Leuven

Tue, 12 Apr 2005 12:40:08 +0000

Facilities/Hardware:

K.U.Leuven is one of the three divisions of the department of Mechanical Engineering. PMA is active in the following areas: manufacturing processes, machine and instrument design, structural dynamics, acoustics, CAD/CAM/CIM, robotics, assembly automation, mechatronics, micro- and precision engineering, and metrology. The PMA division work includes original fundamental work as well as successful industry-oriented projects carried out in collaboration with small, medium and large companies and with international organisations like the European Space Agency. An important role of the research activities of the PMA division is based on international collaboration as shown by the participation of the division in more than 40 EC funded projects. The PMA division has also been nominated as Centre of Excellence by the Belgian Government.

RAS contact:
dominiek reynaerts