]> http://www.4m-net.org/taxonomy/term/1059/0 en http://www.4m-net.org/KnowledgeBase/papers/2008/08-02 <p>P.J. Bolt, J.E. Bullema, R. Korbee, R. Kusters<br /> TNO Science and Industry, Eindhoven, The Netherlands</p> <h3 >Abstract</h3> <p>This paper concerns the feasibility of polymer capping of RF-MEMS devices, replacing traditional silicon solutions. The advantage would be less costs and potential for both further miniaturisation and integration of electrical functions in the cap. One of the challenges is the resistance against expoxy overmoulding as part of the traditional back-end process chain. This involves temperatures of 175oC and pressures of 10MPa, which the cap has to withstand. Calculations are made and experiments carried out to investigate the feasibility of selected polymers. It is shown that nanofillers will lift the polymers mechanical properties comfortably above the minimum established demands.</p> capping materials testing polymer polymer based RF MEMS simulation Wed, 06 Aug 2008 16:22:01 +0100