Process Parameters

C.A. Griffiths, S.S. Dimov, E. B. Brousseau and M. S. Packianather
Manufacturing Engineering Centre, Cardiff University, Cardiff CF24 3AA, UK

Abstract

Micro injection moulding as a replication method is one of the key technologies for micro manufacture. The understanding of process constraints for a selected production route is essential at both the design stage and during mass production. In this research, an existing Finite Element Analysis (FEA) system is used to study the effects of four process parameters, namely melt and mould temperature, injection speed and part thickness. A special attention is paid to the melt flow sensitivity when filling micro channels, particularly the factors affecting shear rate and flow front temperature. The results obtained from two different simulation models are presented for two polymer materials, PP and ABS and conclusions are made about the important factors affecting part quality.