]> http://www.4m-net.org/taxonomy/term/1001/0 en http://www.4m-net.org/KnowledgeBase/papers/2008/06-03 <p>C.A. Griffiths, S.S. Dimov, E.B. Brousseau<br /> Manufacturing Engineering Centre, Cardiff University, CF24 3AA, UK</p> <h3 >Abstract</h3> <p>To increase productivity and thus reduce the unit cost, often micro moulding tools incorporate multiple cavities. For this a runner design must be selected, the main function of the runner system is to facilitate the flow of molten material from the injection nozzle into the mould cavity. Therefore, the micro injection filling process depends on the optimum design of runner systems. In this context, the paper reports an experimental study that investigates the flow behaviour of the polymer melts in micro cavities with a particular focus on the relationship between the filling of micro parts and the size of the runner system. In particular, the runner size effects on the micro injection moulding process were investigated. The filling performance of spiral-like micro cavities was studied as a function of runner size in combination with melt temperature, mould temperature, injection speed and holding pressure time employing the design of experiment approach. In addition, the results were analysed further to identify the effects of the runner</p> injection moulding Injection moulding micro fabrication polymer processing polymers runner system Mon, 04 Aug 2008 13:10:07 +0000