Session 4
Novel materials
Chair: P. Johander, IVF, Sweden
Characterization of Molecularly Imprinted Polymers as Novel Materials for Biochemical Sensors
N. Hosseinia, MC2, Chalmers Univ. of Technology, Sweden
C. Rusu, Imego AB, Sweden
A. Krozea, Imego AB, Sweden
S. Haasl, Imego AB, Sweden
K. Reimhult, Imego AB, Sweden
J-O Lindgren, Imego AB, Sweden
P. Enoksson, MC2, Chalmers Univ. of Technology, Sweden
L. Yec, Applied Biotechnology, Lund University, Sweden
Indirect Tooling Based on Micromilling, Electroforming and Selective Etching
P.T. Tang, Technical University of Denmark, Denmark
J. Fugl, Technical University of Denmark, Denmark
L. Uriarte, Fundacion Tekniker, Spain
G. Bissacco, Technical University of Denmark, Denmark
H.N. Hansen, Technical University of Denmark, Denmark
An Ultrathick SU-8 UV Lithographic Process and Sidewall Characterization
K Jiang1, Centre for MicroEnigineering and NanoTechnology, The University of Birmingham, U.K
C-H Lee, Centre for MicroEnigineering and NanoTechnology, The University of Birmingham, U.K
P. Jin, Centre for MicroEnigineering and NanoTechnology, The University of Birmingham, U.K
Influence of the process parameters on themicrostructure of screenprinted
Ba0.6Sr0.4TiO3 (BST60) thick-films on alumina-substrates
F. Paul, Forschungszentrum Karlsruhe, Institute for Materials Science III, Germany
J.R. Binder, Forschungszentrum Karlsruhe, Institute for Materials Science III, Germany
A. Berto, Forschungszentrum Karlsruhe, Institute for Materials Science III, Germany
G. Link, Forschungszentrum Karlsruhe, Institute for Materials Science III, Germany
H.-J. Ritzhaupt-Kleissl, Forschungszentrum Karlsruhe, Institute for Materials Science III, Germany
|
Session 5
Modelling/simulation
Chair: U. Engel, Erlangen, Germany
Modelling and simulation of piezoelectric actuation and reliability of micropumps
Meiling Zhu, School of Industrial and Manufacturing Science, Cranfield University, UK
Paul B. Kirby, School of Industrial and Manufacturing Science, Cranfield University, UK
Martin Richter, Fraunhofer Institute for reliability and microintergration (IZM), Germany
Yucel Congar, Fraunhofer Institute for reliability and microintergration (IZM), Germany
Alexander Diehl, Chair of Manufacturing Technology, University Erlangen-Nuremberg, Germany
Ralf Voelkl, Chair of Manufacturing Technology, University Erlangen-Nuremberg, Germany
Mechanistic Modelling of the Micro- End Milling Operation
L. Uriarte, Fundación Tekniker, Spain
S. Azcarate, Fundación Tekniker, Spain
A. Herrero, Fundación Tekniker, Spain
L.N. Lopez de Lacalle, Dpto. Ing. Mecanica, ETSII, Spain
A. Lamikiz, Dpto. Ing. Mecanica, ETSII, Spain
Design procedure of planar compliant microgrippers with flexural joints
F. Székely, Budapest University of Technology and Economics, Hungary
T. Szalay, Budapest University of Technology and Economics, Hungary
Finite Element Analysis of Glass Moulding
C. Brecher, Fraunhofer Institute for Production Technology IPT, Germany
M. Winterschladen, Fraunhofer Institute for Production Technology IPT, Germany
S. Lange, Fraunhofer Institute for Production Technology IPT, Germany
F. Klocke, Fraunhofer Institute for Production Technology IPT, Germany
G. Pongs, Fraunhofer Institute for Production Technology IPT, Germany
F. Wang, Fraunhofer Institute for Production Technology IPT, Germany
|
Session 7
Metrology
Chair: L. Mattson, KTH, Sweden
Measurement and characterisation of the microtopography in the contact area between workpiece and tool in microforming
S. Weidel, University of Erlangen-Nuremberg, Germany
U. Engel, University of Erlangen-Nuremberg, Germany
Repeatability analysis of two methods for height measurements in the micrometer range
C. Ferri, The Manufacturing Engineering Centre, Cardiff University,UK
E. Brousseau, The Manufacturing Engineering Centre, Cardiff University,UK
S. Dimov, The Manufacturing Engineering Centre, Cardiff University,UK
L. Mattsson, Department of Production Engineering, Royal Institute of Technology, Sweden
Comparison of the control of laser striation on lamellar cast iron with various techniques
C. Vincenta, Institut FEMTO-ST, France
G. Monteil, Laboratoire de Microanalyse des Surfaces, France
T. Barrière, Institut FEMTO-ST, France
J.C. Gelin, Institut FEMTO-ST, France
Localizing micro-defects on rough metal surfaces.
A. Témun, Dep. of Production Engineering, KTH – Royal Institute of Technology, Sweden
L. Mattsson, Dep. of Production Engineering, KTH – Royal Institute of Technology, Sweden
I. Heikkilä, KiMAB, Sweden
|
Session 8
Systems
Chair: E. Jung, IZM, Germany
Low Cost Capacitive Inclination Sensors based on selectively metallized polymer
Benz Daniel, Institut für Zeitmesstechnik, Fein- und Mikrotechnik, Universität Stuttgart, Germany
Botzelmann Tim, Hahn-Schickard-Gesellschaft, Institut für Mikroaufbautechnik, Germany
Kück Heinz, Institut für Zeitmesstechnik, Fein- und Mikrotechnik, Universität Stuttgart, Germany
Warkentin Danie, Hahn-Schickard-Gesellschaft, Institut für Mikroaufbautechnik, Germany
High resolution low cost optical angular resolver
V. Mayer, Hahn-Schickard-Gesellschaft, Institute for Micro Assembly Technology, Germany
D. Warkentin, Hahn-Schickard-Gesellschaft, Institute for Micro Assembly Technology, Germany
H. Kück, Hahn-Schickard-Gesellschaft, Institute for Micro Assembly Technology, Germany
All Polymer Electrochemical Sensor
M.Bengtsson, Department for Micro- and Nanotechnology, Technical University of Denmark, Denmark
G.Thrastardottir, Department for Micro- and Nanotechnology, Technical University of Denmark, Denmark
T.S.Hansen, Department of Chemical Engineering, Technical University of Denmark, Denmark
O.Geschke, Department for Micro- and Nanotechnology, Technical University of Denmark, Denmark
Polymer optical micro-array sensor
P.J. Bolt, TNO Science & Industry, The Netherlands
R. de Zwart, TNO Science & Industry, The Netherlands
R. Houben, TNO Science & Industry, The Netherlands
G. van Heck, TNO Science & Industry, The Netherlands
F. Dennard, TNO Science & Industry, The Netherlands
P. Rensing, TNO Science & Industry, The Netherlands
J. van Veen, TNO Quality of Life, The Netherlands
B. Langeveld, Holst Centre, The Netherlands
M. Koetse, Holst Centre, The Netherlands
H. Schoo, Holst Centre, The Netherlands
|
