Session 1
Process characterisation
Chair: A. Schoth, IMTEK, Germany
Micro-Injection Moulding: Factors Affecting the Replication Quality of Micro Features
B. Sha, The Manufacturing Engineering Centre, Cardiff University, UK
S. Dimov, The Manufacturing Engineering Centre, Cardiff University, UK
C. Griffiths, The Manufacturing Engineering Centre, Cardiff University, UK
M. S. Packianather, The Manufacturing Engineering Centre, Cardiff University, UK
Microfluidics on foil
T. Velten, Fraunhofer Institute for Biomedical Engineering (IBMT), Germany
M. Richter, Fraunhofer Institute for Reliability and Microintegration (IZM), Germany
G. Klink, Fraunhofer Institute for Reliability and Microintegration (IZM), Germany
K. Bock, Fraunhofer Institute for Reliability and Microintegration (IZM), Germany
C. Khan Malek, Laboratoire FEMTO-ST/Dpt. LPMO, UMR CNRS, France
S. Polster, Bayrisches Laserzentrum, Erlangen, Germany
P. Bolt, TNO Science & Industry, The Netherlands
Large Area Plastic Replication with Modular Molding Tools
M. Heckele, Institute for Microstructure Technoloyg (IMT), Karlsruhe Research Centre, Germany
C. Mehne, Institute for Microstructure Technology, University of Karlsruhe, Germany
R. Steger, IMTEK, Lab for MEMS Applications, University of Freiburg, Germany
P. Koltay, IMTEK, Lab for MEMS Applications, University of Freiburg, Germany
D. Warkentin, Hahn-Schickhard Institute for Microassembly Technology (HSG-IMAT), Germany
Microforming of titanium – forming behaviour at elevated temperature
B. Eichenhüller, University of Erlangen-Nuremberg, Germany
U. Engel, University of Erlangen-Nuremberg, Germany
|
Session 2
Components
Chair: M. Richter, IZM, Germany
Polymer Based Multifunctional 3D-Packages for Microsystems
W. Eberhardt, Hahn-Schickard-Institute for Microassembly Technology HSG-IMAT, Germany
D. Ahrendt, Hahn-Schickard-Institute for Microassembly Technology HSG-IMAT, Germany
U. Keßler, Hahn-Schickard-Institute for Microassembly Technology HSG-IMAT, Germany
D. Warkentin, Hahn-Schickard-Institute for Microassembly Technology HSG-IMAT, Germany
H. Kück, University of Stuttgart, Institute for Micro and Precision Engineering, Germany
Dimensional tolerances of micro precision parts made by ceramic injection moulding
M. Beck, Institute for Materials Research III, Forschungszentrum Karlsruhe Gmb, Germany
V. Piotter, Institute for Materials Research III, Forschungszentrum Karlsruhe Gmb, Germany
R. Ruprech, Institute for Materials Research III, Forschungszentrum Karlsruhe Gmb,Germany
J. Haußelta, Institute of Microsystem Technology (IMTEK), University of Freiburg, Germany
Automated tool exchange for ultraprecision diamond milling and turning applications
C. Brecher, Fraunhofer-Institute for Production Technology IPT, Germany
S. Lange, Fraunhofer-Institute for Production Technology IPT, Germany
F. Niehaus, Fraunhofer-Institute for Production Technology IPT, Germany
C. Wenzel, Fraunhofer-Institute for Production Technology IPT, Germany
Membrane-less mass flow micro sensor
T. Velten, Fraunhofer Institute for Biomedical Engineering (IBMT), 66386 St. Ingbert, Germany
H. Schuck, Fraunhofer Institute for Biomedical Engineering (IBMT), 66386 St. Ingbert, Germany
T. Knoll, Fraunhofer Institute for Biomedical Engineering (IBMT), 66386 St. Ingbert, Germany
N.Graf, Fraunhofer Institute for Biomedical Engineering (IBMT), 66386 St. Ingbert, Germany
W. Haberer, Fraunhofer Institute for Biomedical Engineering (IBMT), 66386 St. Ingbert, Germany
|
