RAS Nodes
Fraunhofer-IBMT
The Fraunhofer-Institut für Biomedizinische Technik (IBMT) is one of the five institutes of the Alliance Life Science of the Fraunhofer-Gesellschaft. IBMT applies its potential on subjects, such as non- or minimal-invasivity, microsystems engineering, implant technology (interfaces between technical and biological microsystems), molecular and cellular biotechnology, nano(bio)technology, telemetric data and energy transfer, health telematics and multilocal sensor systems connected by communication technologies.
One main research field of the Miniaturized Systems Group at IBMT is the development of microfluidic devices for point of care applications. IBMT has a fully equipped class 100 clean room and has expertise in designing and fabricating microfluidic biochip interfaces as well as in the whole field of biochip packaging. Technologies like reel-to-reel hot embossing and lamination as well as moulding are available. Another research field is the development of modules and systems for the wireless transmission of biological & physiological signals for bio-monitoring and remote control of active medical implants. Included herein is the wireless transmission of energy for the operation of medical implants. The group has about 10 scientific and technical fulltime employees.
Thomas Velten
categories
Assembly & packaging | blood diagnostics | consultancy | DNA protein analysis | drug delivery systems | dry etching | Hot/UV embossing | Laser ablation | Mechanical machining | Medical | Micro-fabrication | Micro-fluidics | Micro-sensors & actuators | polymers | sensors | uv & x-ray lithographyIMTEK
The Institute for Microsystem Technology (IMTEK), founded in 1995, is one of the largest academic institutions in this field. As it was created completely from scratch as part of the new-founded Faculty of Applied Sciences we share a new campus with modern teaching and training facilities together with the Institute of Computer Science. The foundation of a new technical faculty provided the chance not only to use new facilities but also to create a novel engineering course which differs significantly from traditional engineering disciplines. So the basis for the specification of the course has been the questions for the indispensable skills of a ‘universal’ engineer of the 21st century. The curriculum was inaugurated in October 1996 when the first classes started in the course microsystem technology. The first graduations have been in spring 2001. Between 1998 and 2001 about 90 freshmen started studying Microsystem Technology every year. The curriculum has been modified several times since 1996 in order to comply more and more with our initial goals.
Andreas Schoth
categories
acceleration | actuators | Assembly & packaging | blood diagnostics | ceramics | combinatorial synthesis | consultancy | diamond turning | diffractive optical elements | DNA protein analysis | drug delivery systems | Electrical discharge machining (EDM) | Electrochemical machining (ECM) | electrodes | flow | general | glass | heat exchangers | Hot/UV embossing | Injection moulding | Laser ablation | Measurement / Metrology | metals | micro-mixers | micro-pump actuators | micro-reactors | micro-valve actuators | microreflective optical components | milling | motors | moulds | new materials | polymers | refractive optical elements | relays | small scale production | switches | temperature | tool design | tooling | uv & x-ray lithography | waveguides and photonic structuresKTH - Microsystem Technology & Cleanroom fabrication facility
our research and advisory potential: http://www.s3.kth.se/mst/research/index.shtml.
For our cleanroom facilities: http://www.electrumlaboratoriet.se/.
The Microsystem Technology lab (MST) is a part of the department of Signals, Sensors and Systems (S3). Our research is mainly centered around Microelectromechanical Systems (MEMS) and its applications, with a focus on silicon-based applied sensor and actuator technology. Our research staff has developed a significant number of devices with promising performance. The group fabricates its silicon structures and devices at the KTH microelectronics laboratory, comprising 1200m2 of cleanroom area with all the facilities of small-scale microelectronics and for research on and development of special purpose structures and components in silicon. The group works on applications in the medical field (MedMEMS), the biotechnology field (BioMEMS), optical components (OptoMEMS) and radio frequency signal components (RFMEMS).
wouter
categories
actuators | Assembly & packaging | Automotive | Communications | consultancy | design for manufacture | DNA protein analysis | drug delivery systems | dry etching | Electroplating | flow | gas | general | glass | Mechanical machining | Medical | Micro-fabrication | Micro-fluidics | micro-mixers | Micro-optics | micro-reactors | Micro-sensors & actuators | micro-valve actuators | new materials | pressure | Scientific / Academic Community | sensors | switchesTNO Science and Industry
TNO Industrial Technology increases the competitive strength of companies by providing them support in the development of products, materials and production processes. In order to solve our customers' problems and help them fulfil their ambitions, we combine our competences with the customers' own expertise and, if necessary, we involve other TNO institutes and third parties.
Pieter Bolt
categories
actuators | Agriculture | Assembly & packaging | Automotive | blanking/punching | blood diagnostics | Communications | consultancy | design for manufacture | displays | DNA protein analysis | Electroplating | flow | general | glass | grinding | heat exchangers | Injection moulding | Laser ablation | Manipulation / handling | Mechanical machining | Medical | metals | Micro-fabrication | Micro-fluidics | milling | polymers | pressure | Scientific / Academic Community | sensors | Services | small scale production | Space science | temperature | tool design
Copyright© 4M Network of Excellence.
