| Session 1 – Process characterisation |
Laser polishing
T. Dobrev, Manufacturing Engineering Centre, Cardiff University, UK
D.T Pham, Manufacturing Engineering Centre, Cardiff University, UK
S. Dimov, Manufacturing Engineering Centre, Cardiff University, UK
Challenging the sustainability of micro products development
A. De Grave, Technical University of Denmark, Denmark
S.I. Olsen, Technical University of Denmark, Denmark
Process parameter analysis on surface roughness and process forces in micro cutting
J. Fleischer, Institute of Production Science (wbk),Universität Karlsruhe (TH), Germany
G. Lanza, Institute of Production Science (wbk),Universität Karlsruhe (TH), Germany
M. Schlipf, Institute of Production Science (wbk),Universität Karlsruhe (TH), Germany
J. Kotschenreuther, Institute of Production Science (wbk),Universität Karlsruhe (TH), Germany
J. Peters, Institute of Production Science (wbk),Universität Karlsruhe (TH), Germany
On the use of hot embossing for the reproduction of the surface topography of mould microreliefs
M. Sahli, Laboratoire de Microanalyse des Surfaces (LMS),Laboratoire FEMTO-ST, France
C. Millot, Laboratoire de Microanalyse des Surfaces (LMS), France
C. Roques-Carmes, Laboratoire de Microanalyse des Surfaces (LMS), France
C. Khan Malek, Laboratoire FEMTO-ST, France
J.C. Gelin, Laboratoire FEMTO-ST, France
Application of SOI based sensors for MEMS wafer-level packaging
F. Ghavanini, Chalmers University of Technology, Sweden
C. Rusu, The Imego Institute. Sweden
K. Persson, The Imego Institute. Sweden
P. Enoksson, Chalmers University of Technology, Sweden
Protective Coating of Zinc and Zinc Alloys for Industrial Applications
Y. Toshev, Bulgarian Academy of Sciences (BAS), Bulgaria
V. Mandova, TDP Group Ltd, Sofia, Bulgaria
N. Boshkov, Bulgarian Academy of Sciences (BAS), Bulgaria
D. Stoychev, Bulgarian Academy of Sciences (BAS), Bulgaria
P. Petrov, Bulgarian Academy of Sciences (BAS), Bulgaria
N. Tsvetkova, Bulgarian Academy of Sciences (BAS), Bulgaria
G. Raichevski, Bulgarian Academy of Sciences (BAS), Bulgaria
Ch. Tsvetanov, Bulgarian Academy of Sciences (BAS), Bulgaria
A. Gabev, Gabex Ltd, Sofia, Bulgaria
R. Velev, TDP Group Ltd, Sofia, Bulgaria
K. Kostadinov, Bulgarian Academy of Sciences (BAS), Bulgaria
Size effects in the production of micro strip by the flat rolling of wire
K. van Putten, Metal Forming Institute, RWTH Aachen University, Germany
R. Kopp, Metal Forming Institute, RWTH Aachen University, Germany
G. Hirt, Metal Forming Institute, RWTH Aachen University, Germany
Manufacturing and characterization of water repellent surfaces
A. De Grave, Technical University of Denmark, Denmark
P. Botija, Technical University of Denmark, Denmark
H.N. Hansen, Technical University of Denmark, Denmark
P.T. Tang, Technical University of Denmark, Denmark
Experimental study on the free-sintering process of a micro-porous HDPE membrane
D.B. Trifonov, Institute of Information Technologies, Bulgarian Academy of Sciences, Bulgaria
Y.E. Toshev, Institute of Information Technologies, Bulgarian Academy of Sciences, Bulgaria
Hybrid Tooling: A Review of Process Chains for Tooling Microfabrication within 4M
S. Azcarate, Fundación Tekniker, Spain
L. Uriarte, Fundación Tekniker, Spain
S. Bigot, School of Engineering, Cardiff University, UK
P. Bolt, TNO Industrial Technology, The Netherlands
L. Staemmler, HSG-IMAT, Germany
G. Tosello, Department of Manufacturing Engineering and Management, DTU, Denmark
S. Roth, The Bayerisches Laserzentrum, BLZ, Germany
A. Schoth, IMTEK, University of Freiburg, Germany
|
| Session 2 – Components |
Force fields with one stable equilibrium for micropart 2D manipulation
E.K. Xidiasa, University of Patras, Greece
N.A. Aspragathosa, University of Patras, Greece
Laser transmission welding of micro plastics parts
E. Haberstroh, Institute of Plastics Processing (IKV), Germany
W.-M. Hoffmann, Institute of Plastics Processing (IKV), Germany
Developments in Micro Ultrasonic Machining (MUSM)
J. Boy, FEMTO-ST/LCEP, France
M. Aiguillé, TEMIS Innovation (Projet µUSM, France
A. Boulouize, TEMIS Innovation (Projet µUSM, France
C. Khan-Malek, FEMTO-ST / LPMO, France
Manufacture of recessed rotating microelectrodes for mass transport investigations in the LIGA process
M. Lisinenkova, Institut für Mikrostrukturtechnik, Forschungszentrum Karlsruhe GmbH, Germany
L. Hahn, Institut für Mikrostrukturtechnik, Forschungszentrum Karlsruhe GmbH, Germany
J. Schulz, Institut für Mikrostrukturtechnik, Forschungszentrum Karlsruhe GmbH, Germany
Fabrication of a solenoid-type inductor with electroplated NiFe magnetic Core by MEMS
C. Lei, Institute of Micro and Nano Science & Technology, China
W. Ding, Institute of Micro and Nano Science & Technology, China
Y. Zhou, Institute of Micro and Nano Science & Technology, China
X-Y Gao, Institute of Micro and Nano Science & Technology, China
H Choi, Samsung Advanced Institute of Technology (SAIT), Korea
J Won, Samsung Advanced Institute of Technology (SAIT), Korea
The effects of material microstructure in micro-milling
K. Popov, MEC, Cardiff University, UK
S. Dimov, MEC, Cardiff University, UK
D. T. Pham, MEC, Cardiff University, UK
R. Minev, MEC, Cardiff University, UK
A. Rosochowski, University of Strathclyde, UK
L. Olejnik, Warsaw University of Technology, Poland
M. Richert, AGH - University of Science and Technology, Poland
Replication of micrometric pattern by hot embossing of silica based feedstock
L. Federzoni, CEA-Grenoble, France
O. Fourcade, CEA-Grenoble, France
P. Lourdin, ECAM, France
Off-Axis Machining of NURBS Freeform Surfaces by Fast Tool Servo Systems
C. Brecher, Fraunhofer Institute for Production Technology IPT, Germany
S. Lange, Fraunhofer Institute for Production Technology IPT, Germany
M. Merz, Fraunhofer Institute for Production Technology IPT, Germany
F. Niehaus, Fraunhofer Institute for Production Technology IPT, Germany
M. Winterschladen, Fraunhofer Institute for Production Technology IPT, Germany
Prototyping of multilayer waveguides with V-grooves in COC/Topas®
F. Bundgaard, Technical University of Denmark, Denmark
J. Ducrée, HSG-IMIT, Germany
R. Zengerlec, Germany
O. Geschke, Technical University of Denmark, Denmark
An integrated solenoid-type inductor with Fe-based soft magnetic core
C. Lei, Institute of Micro and Nano Science & Technology, China
Y. Zhou, Institute of Micro and Nano Science & Technology, China
W. Ding, Institute of Micro and Nano Science & Technology, China
X-Y. Gao, Institute of Micro and Nano Science & Technology, China
Y. Cao, Institute of Micro and Nano Science & Technology, China
H. Choi, Samsung Advanced Institute of Technology (SAIT), Samsung Electronics Co, Korea
J. Won, Samsung Advanced Institute of Technology (SAIT), Samsung Electronics Co, Korea
In-process assembly of micro metal inserts in a polymer matrix
G. Tosello, Technical University of Denmark, Denmark
H. N. Hansen, Technical University of Denmark, Denmark
Low Temperature Adhesive Bonding in MEMS
D. Andrijasevic, Vienna University of Technology, Vienna
W. Smetana, Vienna University of Technology, Vienna
D. Esinenco, The National Institute for R&Development in Microtechnologies, Romania
W. Brenners, Vienna University of Technology, Vienna
Design and Manufacturing of Micro Heaters for Gas Sensors
P. Johander, IVF- Industrial Research and Development Corporation, Sweden,
I. Goenaga, Fundacion Tekniker, Micro and Nanotechnology Department, Spain
D. Gomez, Fundacion Tekniker, Micro and Nanotechnology Department, Spain
C. Moldovan, The National Institute for R&D in Microtechnologies, Romania
O. Nedelcu, The National Institute for R&D in Microtechnologies, Romania
P. Petkov, Manufacturing Engineering and Multidisciplinary Technology Centre, Cardiff University, Wales
U. Kaufmann, Forschungszentrum Karlsruhe, Institut für Materialforschung III, Germany
H.-J. Ritzhaupt-Kleissl,
R. Dorey, Nanotechnology Group, Cranfield University, Cranfield, UK
K. Persson, IMEGO, Sweden
|
| Session 4 – Novel materials |
Forming and machining of the nano-crystalline alloys
Gy. Krállics, Budapest University of Technology and Economics, Hungary
M. Horváth, Budapest University of Technology and Economics, Hungary
J. Nyirőb, Budapest University of Technology and Economics, Hungary
Micro EDM parameters optimisation
S. Bigot, Manufacturing Engineering Centre, Cardiff University, UK
J. Valentinčič, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
O. Blatnik, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
M. Junkar, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
Hard Tooling by μEDM-milling for Injection Molding
R. Jurischka, IMTEK, Laboratory for Process Technology University of Freiburg, Germany
A. Schoth, for Process Technology University of Freiburg, Germany
C. Müller, for Process Technology University of Freiburg, Germany
D. Thiebaud, Sarix SA, Micro EDM Technology, Switzerland
R. Gallera, Sarix SA, Micro EDM Technology, Switzerland
H. Reinecke, for Process Technology University of Freiburg, Germany
Modelling and design of GaN based piezoelectric MEMS
C.R. Bowen, Materials Research Centre, Department of Mechanical Engineering, University of Bath, UK,
D.W.E. Allsopp, Department of Electronic and Electrical Engineering, University of Bath, UK
R. Stevens, Materials Research Centre, Department of Mechanical Engineering, University of Bath, UK,
P.Shields, Department of Physics, University of Bath, UK
W.N. Wang, Department of Physics, University of Bath, UK
Systematic Interaction of Sedimentation and Electrical Field in Electrophoretic Deposition
S. Bonnasa, IMTEK, University of Freiburg, Germany
J. Tabellion, IMTEK, University of Freiburg, Germany
H.-J. Ritzhaupt-Kleissl, Institute for Materials Research III, Forschungszentrum Karlsruhe,Germany
J. Haußelt, Institute for Materials Research III, Forschungszentrum Karlsruhe,Germany
Particle size dependent viscosity of polymer-silica-composites
T. Hanemann, Albert-Ludwigs-Universität Freiburg, Institut f. Mikrosystemtechnik (IMTEK), Germany
R. Heldele, Forschungszentrum Karlsruhe, Institut f. Materialforschung III, Germany
J. Hausselt, Albert-Ludwigs-Universität Freiburg, Institut f. Mikrosystemtechnik (IMTEK), Germany
Structuring of phosphorescent pigments by two-step hot embossing for signaletic applications
M. Sahli, Laboratoire FEMTO-ST, Département LMARC, France
F. Legay, Laboratoire de Microanalyse des Surfaces (LMS), France
C. Roques-Carmes, Laboratoire de Microanalyse des Surfaces (LMS), France
C. Khan Malek, Laboratoire FEMTO-ST, Département LPMO, France
J.C. Gelin, Laboratoire FEMTO-ST, Département LMARC, France
Fabrication of nano-dimensional features in FOTURAN using focused ion beam technology
P.T. Docker, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK
J Teng, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK
P. D. Prewett, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK
K. C. Jiang, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK
Self-assembled nanostructured polymer films from concentrated solutions of block copolymers
N. Didier, Ecole Nationale Supérieure de Physique de Grenoble, France
P. Panine, European Synchrotron Radiation Facility, France
|
| Session 5 – Modelling/Simulation |
On Forces and Interactions at Small Distances in Micro and Nano Assembly Process
D. Dantchev, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
K. Kostadinov, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
Unified Approach For Functional Task Formulation In Domain Of Micro/Nano Handling Operations.
K. Kostadinov, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
R. Kasper, University “Otto-von Guericke” – Institute of Mobile systems, Germany
T. Tiankov, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
M. Al-Wahab, University “Otto-von Guericke” – Institute of Mobile systems, Germany
D. Chakarov, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
D. Gotseva, Technical University, Faculty of Computer Systems and Control, Bulgaria
Thermally induced stresses in an adhesively bonded multilayer structure with 30-micron thick film piezoelectric ceramic and metal components
R.Jourdain, School of Industrial and Manufacturing Science, Cranfield University, UK
S.A.Wilson, School of Industrial and Manufacturing Science, Cranfield University, UK
|
| Session 7 – Metrology |
Mechanical Testing of Laser Welded Micro Seams
C.B. Nielsen, Danish Technological Institute, Denmark
D. Buccoliero, Danish Technological Institute, Denmark
T. Ussing, Fluimedix ApS, Denmark
Micro particle sizing by using of ray optics Monte Carlo code
M.D. Mikrenska, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
P.I. Koulev, Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
J.-B. Renard, Laboratoire de Physique et Chimie de l'Environnement, France
Fiber optic temperature sensor based on spectral transmitivity of CdTe
Z.V. Djinovic, Vienna University of Technology, Austria
M.C. Tomic, Institut Bezbednosti, Serbia and Montenegro
S. Ivankovic, Institut Bezbednosti, Serbia and Montenegro
A. Vujanic, Integrated Microsystems Austria, Austria
Reactive magnetron sputtering deposited ITO thin films : influence of O2 admixture on microstructure and optical properties
C. Secouard, CEA Grenoble, Laboratoire des Technologies des Surfaces, France
C. Ducros, CEA Grenoble, Laboratoire des Technologies des Surfaces, France
P. Roca i Cabarrocas, Laboratoire de Physique des Interfaces et des Couches Minces, France
S. Noël, CEA Grenoble, Laboratoire des Composants Hybrides, France
F. Sanchette, CEA Grenoble, Laboratoire des Technologies des Surfaces, France
|
| Session 8 – Systems |
Ultrasonic Plasticising for Micro Injection Moulding
W. Michaeli, Institute of Plastics Processing at RWTH Aachen University, Germany
D. Opfermann, Institute of Plastics Processing at RWTH Aachen University, Germany
Micro EDM: Accuracy of on-the-machine dressed electrodes
A. Rees, Manufacturing Engineering Centre, Cardiff University, U.K.
S. Dimov, Manufacturing Engineering Centre, Cardiff University, U.K.
A. Ivanov, Manufacturing Engineering Centre, Cardiff University, U.K.
A. Herrero, Tekniker, Spain
L.G. Uriarte, Tekniker, Avda, Spain
Design and testing of a d31 mode piezoelectric unimorph for direct power generation by coupling with a microcombustor
G. Liu, Nanotechnology Centre in the Department of Materials, Cranfield University, UK
R.W. Whatmore, Tyndall National Institute, Cork, Ireland
Water jet machining of MEDM tools
O. Blatnik, University of Ljubljana, Slovenia
H. Orbanic, University of Ljubljana, Slovenia
C. Masclet, University of Grenoble, France
H. Paris, University of Grenoble, France
M. Museau, University of Grenoble, France
J. Valentincic, University of Ljubljana, Slovenia
B. Jurisevic, University of Ljubljana, Slovenia
M. Junkar, University of Ljubljana, Slovenia
Sensor-less measurement of rotational speed for piezoelectric micro-motors
A. Venturi, School of Industrial and Manufacturing Science, Cranfield University,UK
S. A. Wilson, School of Industrial and Manufacturing Science, Cranfield University,UK
The micro-machining evaluation of non-metallic materials – by a fluid guided laser
P. Snowdon, School of Engineering, Durham University, UK
D. Wood, School of Engineering, Durham University, UK
P. Maropoulos, Department of Mechanical Engineering, University of Bath, UK
A Novel Protective Cover for Microcomponents
A. Cvetanovic, Vienna University of Technology, Institute of Sensor and Actuator Systems, Austria
A. Cvetanovic, Vienna University of Technology, Institute of Sensor and Actuator Systems, Austria
D. Andrijasevic, Vienna University of Technology, Institute of Sensor and Actuator Systems, Austria
I. Gioroudi, Vienna University of Technology, Institute of Sensor and Actuator Systems, Austria
W. Brenner, Vienna University of Technology, Institute of Sensor and Actuator Systems, Austria
Micro injection moulding: the effects of tool surface finish on melt flow behaviour
C.A. Griffiths, Manufacturing Engineering Centre, Cardiff University, UK
S. Dimov, Manufacturing Engineering Centre, Cardiff University, UK
D.T. Pham, Manufacturing Engineering Centre, Cardiff University, UK
Flow control for high-pressure micro hydraulics
A.J.M. Moers, Department of Mechanical Engineering, Katholieke Universiteit Leuven, Belgium
D. Reynaerts, Department of Mechanical Engineering, Katholieke Universiteit Leuven, Belgium
|
